MULTIGAUGE MASTER

FLATNESS CHECKING AND DEPTH CHECKING MASTER

Send Message

Computerized SPC Multi bore Checking System Air-Electronic input from VISION Air Plug Two metric measuring ranges: 200µm (resolution 0.1µm), 2000µm (resolution 1µm), and two Inch measuring ranges: 20.0 thou (resolution 0.01 thou) & 200 thou (resolution 0.1 thou) Measurement display in absolute or comparative form Auto calibration with two setting masters Keyboard entered upper & lower tolerance limits (UTL & LTL), applicable to the values displayed Static or dynamic (max, min, average & TIR) measurements Combined advantages of non-contact air sensing and high precision electronics SPC all chart available air saving

Send Message

Air Gauges

Air caliper

Air calipers are ideal for measuring diameters of jobs held between the centers on machine or interrupted shafts like crankshafts “V” support for perfect centering and stability ‘’V” support with tungsten carbide pads for diameter above 16 mm Ideal for collared diameters i.e. crankshaft pin and journal Multi-jet air calipers available for multi-point measurement i.e. to check crowning of crank pins and journal diameters Can be supplied bench mounted for checking small diameters or against specific needs

Send Message

Air Gauges

Air Ring

Two Jet Air Ring gauge to check outside diameter, taper & ovality Three jet Air Ring gauge for detecting tri-lobed effect for diameter above 4 mm only Can be supplied with tungsten carbide sleeve on request for checking hardened job Can be supplied with multiple jets

Send Message

Air Gauges

Air Plug Gauge

Quick and easy checking of bore Standard 2 jets for checking size, taper, ovality 3 jets at 120 degree for average size & tri-lobed effect (for diameter 6 mm & above) With extensions to check deeper bores Can be supplied to check through or blind bores Can be supplied with multiple jets Hard chrome plated for extended life Can be supplied with carbide sleeve on request For specific depth or land width checking, adjustable depth collars can be provided

Send Message

PLAIN GAUGES

MASTER RING GAUGE

Used for setting of measuring instruments like horizontal comparators, length measuring machines for ID checking, dial bore gauges etc. Made from oil hardening non shrinking gauge steel, hardened and tempered to 60-62 HRC Sub-zero treated at -80 °C for long term dimensional stability Actual dimensions duly etched Calibrated at 20 °C under Standards room condition against national/international traceable standards Certificate of calibration is provided along with each master traceable to national/international standards, certificate under NABL (as per ISO 17025) as per request Master Setting Rings also supplied in standard set consisting of sizes: Set 1: Ø4.0, Ø5.0, Ø6.0 & Ø8.0 mm Set 2: Ø10.0, Ø12.0, Ø16.0 , Ø20.0 & Ø25.0 mm Set also supplied as per customer’s requirement