'advanced vision gauging systems'

RL stands for Filter, Regulator, and Lubricator, and it is a common assembly used in pneumatic systems to ensure clean, stable, and properly lubricated air supply. When combined with an FRC (Air Filter Regulator Combination), it provides a streamlined solution for air treatment in pneumatic systems

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

VISION offers custom design & built solutions for measurement of high volume parts in production. Combining various sensor options like LVDT, PIEZZO sensors & camera; our solutions provide precision with through put.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Computerized SPC Multi bore Checking System Air-Electronic input from VISION Air Plug Two metric measuring ranges: 200µm (resolution 0.1µm), 2000µm (resolution 1µm), and two Inch measuring ranges: 20.0 thou (resolution 0.01 thou) & 200 thou (resolution 0.1 thou) Measurement display in absolute or comparative form Auto calibration with two setting masters Keyboard entered upper & lower tolerance limits (UTL & LTL), applicable to the values displayed Static or dynamic (max, min, average & TIR) measurements Combined advantages of non-contact air sensing and high precision electronics SPC all chart available air saving

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Every gauge carries a calibration certificate giving actual values Module 1A, Module 2A giving the most economical solution to your inspection needs on shop floor High pressure system: high speed of response and self cleaning of gauging area ensures accurate reading of size, taper and ovality at a time Non-contact gauging: long life due to minimal frictional wear Two setting Masters: ensures correct magnification of reading at all times System pressure check gauge: provides a constant check on the system pressure i.e. 3 bars (45 psi) regulated by a high precision regulator built into the unit Minimum line pressure required 4.5 bars (67 psi) Air consumption 46 LPM For diameter 6 mm and above Module-1A air gauge unit is to be used For diameter below 6 mm Module-2A air gauge unit is to be used

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Supplied with a fixed adaptor which fits all types of connectors. Foldable feet for better Readability. High pressure system: high speed of response and self cleaning of gauging area ensures accurate reading of size, taper and ovality at a time. Non-contact Gauging: long life due to minimal frictional wear. RANGE +/-0.020 mm, +/-0.040 mm, +/-0.002″

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED