Every gauge carries a calibration certificate giving actual values Module 1A, Module 2A giving the most economical solution to your inspection needs on shop floor High pressure system: high speed of response and self cleaning of gauging area ensures accurate reading of size, taper and ovality at a time Non-contact gauging: long life due to minimal frictional wear Two setting Masters: ensures correct magnification of reading at all times System pressure check gauge: provides a constant check on the system pressure i.e. 3 bars (45 psi) regulated by a high precision regulator built into the unit Minimum line pressure required 4.5 bars (67 psi) Air consumption 46 LPM For diameter 6 mm and above Module-1A air gauge unit is to be used For diameter below 6 mm Module-2A air gauge unit is to be used

FLATNESS CHECKING AND DEPTH CHECKING MASTER

A pin gauge, also known as a pin gage, is a precision measuring tool used to measure the diameter or width of holes, slots, or other features on a workpiece. It typically consists of a set of cylindrical pins of varying diameters that are used to determine the size of a hole or opening. Here are some key facts about pin gauges: Types of Pin Gauges: 1. Standard Pin Gauge: Measures hole diameters in increments (e.g., 0.001 inches). 2. Tapered Pin Gauge: Measures tapered holes or slots. 3. Ball-Pin Gauge: Uses a ball-shaped tip to measure curved or irregular surfaces. How to Use a Pin Gauge: 1. Select the appropriate pin gauge size. 2. Insert the pin into the hole or slot until it stops. 3. Check the size marked on the pin to determine the measurement. Advantages: 1. High accuracy and precision. 2. Easy to use. 3. Inexpensive compared to other measuring tools. Common Applications: 1. Machining and manufacturing. 2. Quality control and inspection. 3. Aerospace and automotive industries.

Computerized SPC Multi bore Checking System Air-Electronic input from VISION Air Plug Two metric measuring ranges: 200µm (resolution 0.1µm), 2000µm (resolution 1µm), and two Inch measuring ranges: 20.0 thou (resolution 0.01 thou) & 200 thou (resolution 0.1 thou) Measurement display in absolute or comparative form Auto calibration with two setting masters Keyboard entered upper & lower tolerance limits (UTL & LTL), applicable to the values displayed Static or dynamic (max, min, average & TIR) measurements Combined advantages of non-contact air sensing and high precision electronics SPC all chart available air saving

Air calipers are ideal for measuring diameters of jobs held between the centers on machine or interrupted shafts like crankshafts “V” support for perfect centering and stability ‘’V” support with tungsten carbide pads for diameter above 16 mm Ideal for collared diameters i.e. crankshaft pin and journal Multi-jet air calipers available for multi-point measurement i.e. to check crowning of crank pins and journal diameters Can be supplied bench mounted for checking small diameters or against specific needs

Two Jet Air Ring gauge to check outside diameter, taper & ovality Three jet Air Ring gauge for detecting tri-lobed effect for diameter above 4 mm only Can be supplied with tungsten carbide sleeve on request for checking hardened job Can be supplied with multiple jets

Quick and easy checking of bore Standard 2 jets for checking size, taper, ovality 3 jets at 120 degree for average size & tri-lobed effect (for diameter 6 mm & above) With extensions to check deeper bores Can be supplied to check through or blind bores Can be supplied with multiple jets Hard chrome plated for extended life Can be supplied with carbide sleeve on request For specific depth or land width checking, adjustable depth collars can be provided

Used for setting of measuring instruments like horizontal comparators, length measuring machines for ID checking, dial bore gauges etc. Made from oil hardening non shrinking gauge steel, hardened and tempered to 60-62 HRC Sub-zero treated at -80 °C for long term dimensional stability Actual dimensions duly etched Calibrated at 20 °C under Standards room condition against national/international traceable standards Certificate of calibration is provided along with each master traceable to national/international standards, certificate under NABL (as per ISO 17025) as per request Master Setting Rings also supplied in standard set consisting of sizes: Set 1: Ø4.0, Ø5.0, Ø6.0 & Ø8.0 mm Set 2: Ø10.0, Ø12.0, Ø16.0 , Ø20.0 & Ø25.0 mm Set also supplied as per customer’s requirement

A thread gauge is used to check the dimensions of a specific thread form angle, pitch and diameter. Plug gauges are used to check internal threads, whereas ring gauges are used to check external threads. Each gauge comprises of two parts: a GO gauge and a NO GO gauge. Both parts should be used to check the thread.