Seven segment, 6 character, 3 colour LED display, ½ inch tall Air-Electronic input from All Air Plug and Ring Gauges (APG & ARG) universal type Two metric measuring ranges: (resolution 0.5µm), (resolution 1µm) Measurement display in absolute or comparative form Auto calibration with two setting masters Keyboard entered upper & lower tolerance limits (UTL & LTL), applicable to the values displayed Static or dynamic (max, min, average & TIR) measurements Non-volatile storage of all menu entered values Available in 1 / 2 / 3 or 4 independent channels Combined advantages of non-contact air sensing and high precision electronics RS232 data output available for further processing like machine control through relay output or for SPC AIR SAVING TIMER AND PROXY SENSOR BASE USB DATA SAVE

7 segment tri colour LED display Air Gauge Can directly connected RS-232 serial port for PC connectivity Accuracy ±1% FSD 0.1μm, 0.5μm, 1μm, Least Count Absolute or comparative measurement Tolerance limit setting 2 LED’s showing status Accept-Reject-Rework Built in air regulator for precise pressure Auto ID – OD recognition Compatible with wide range of Air gauges from leading manufacturers Air saving facility as a standard feature for saving costly air Optional — 50000 readings storage facility LOW MAINTANACE

Features 7 segment tri colour LED display Air Gauge Can directly connected RS-232 serial port for PC connectivity Accuracy ±1% FSD 0.1μm, 0.5μm, 1μm, Least Count Absolute or comparative measurement Tolerance limit setting 2 LED’s showing status Accept-Reject-Rework Built in air regulator for precise pressure Auto ID – OD recognition Compatible with wide range of Air gauges from leading manufacturers Air saving facility as a standard feature for saving costly air Optional — 50000 readings storage facility LOW MAINTANACE

1.1 AIR and LVDT PROBE ELECTRONICS COLUMN GAUGE (AIR TRANDUCERS ) / ( AIR PIEZO ) — Single Channel tri color bar graph and Six Digit Display — Inch and metric Ranges — Compatible with Half bridge and full bridge LVDT probe — Absolute / Comparative measurement — Static / Dynamic measurement — Pneumatic converter with 1 input when supplied with this module — Pneumatic converter without flow control valves — RS-232 serial port for PC connectivity — External relay output data saved — Optional — 5000 readings storage facility Range ±0.005 ±0.025 ±0.050 ±0.100 Bar graph L.C. 0.0002 0.0005 0.001 0.002 Six Digit L.C. 0.0002 0.0005 0.001 0.002

Computerized SPC Multi bore Checking System Air-Electronic input from VISION Air Plug Two metric measuring ranges: 200µm (resolution 0.1µm), 2000µm (resolution 1µm), and two Inch measuring ranges: 20.0 thou (resolution 0.01 thou) & 200 thou (resolution 0.1 thou) Measurement display in absolute or comparative form Auto calibration with two setting masters Keyboard entered upper & lower tolerance limits (UTL & LTL), applicable to the values displayed Static or dynamic (max, min, average & TIR) measurements Combined advantages of non-contact air sensing and high precision electronics SPC all chart available air saving

Applications Standard/Honing Dimension Type Linear Resolution 0.1μm/ 1μm Units mm Measurement Modes Current, Min, Max, TIR, AVG Additional results Max, Min, Ovality, and Taper for respective result can be display in run mode as additional results. Result Formula Editor Result formula can be edited for combinations of Piezo channels and / or other results. Indications Pass, Fail, Warning with facility to select require display reading in require colour according to the tolerance band Grade Max 25 Grades available Other Features Machine Stop Massage and Machine stop signal available for reject job condition Calibration Single/Double Master configurable / Force Mastering after N number of measured jobs / Group Calibration for selected result in one group / Auto Mastering is available. Accept Higher and Lower master on inserting into fixture/plug automatically in calibration process Auto Air Cut-Off Yes (Air will become ON after inserting job in Fixture/Plug) Air Saving facility / When nothing is inserted in Fixture/Plug Air will be OFF Measurement process Auto Cycle (After inserting job in Fixture/Plug it will show related Fixture/Plug result) / Measurement Cycle (Sequential measurement) Online SPC Cp, Cpk,

Applications Standard/Honing Dimension Type Linear Resolution 0.1μm/ 1μm Units mm Measurement Modes Current, Min, Max, TIR, AVG Additional results Max, Min, Ovality, and Taper for respective result can be display in run mode as additional results. Result Formula Editor Result formula can be edited for combinations of Piezo channels and / or other results. Indications Pass, Fail, Warning with facility to select require display reading in require colour according to the tolerance band Grade Max 25 Grades available Other Features Machine Stop Massage and Machine stop signal available for reject job condition Calibration Single/Double Master configurable / Force Mastering after N number of measured jobs / Group Calibration for selected result in one group / Auto Mastering is available. Accept Higher and Lower master on inserting into fixture/plug automatically in calibration process Auto Air Cut-Off Yes (Air will become ON after inserting job in Fixture/Plug) Air Saving facility / When nothing is inserted in Fixture/Plug Air will be OFF Measurement process Auto Cycle (After inserting job in Fixture/Plug it will show related Fixture/Plug result) / Measurement Cycle (Sequential measurement) Online SPC Cp, Cpk,

Every gauge carries a calibration certificate giving actual values Module 1A, Module 2A giving the most economical solution to your inspection needs on shop floor High pressure system: high speed of response and self cleaning of gauging area ensures accurate reading of size, taper and ovality at a time Non-contact gauging: long life due to minimal frictional wear Two setting Masters: ensures correct magnification of reading at all times System pressure check gauge: provides a constant check on the system pressure i.e. 3 bars (45 psi) regulated by a high precision regulator built into the unit Minimum line pressure required 4.5 bars (67 psi) Air consumption 46 LPM For diameter 6 mm and above Module-1A air gauge unit is to be used For diameter below 6 mm Module-2A air gauge unit is to be used

Air calipers are ideal for measuring diameters of jobs held between the centers on machine or interrupted shafts like crankshafts “V” support for perfect centering and stability ‘’V” support with tungsten carbide pads for diameter above 16 mm Ideal for collared diameters i.e. crankshaft pin and journal Multi-jet air calipers available for multi-point measurement i.e. to check crowning of crank pins and journal diameters Can be supplied bench mounted for checking small diameters or against specific needs