1.1 MUX DIGITAL AIR GAUGE UNIT

Seven segment, 6 character, 3 colour LED display, ½ inch tall Air-Electronic input from All Air Plug and Ring Gauges (APG & ARG) universal type Two metric measuring ranges: (resolution 0.5µm), (resolution 1µm) Measurement display in absolute or comparative form Auto calibration with two setting masters Keyboard entered upper & lower tolerance limits (UTL & LTL), applicable to the values displayed Static or dynamic (max, min, average & TIR) measurements Non-volatile storage of all menu entered values Available in 1 / 2 / 3 or 4 independent channels Combined advantages of non-contact air sensing and high precision electronics RS232 data output available for further processing like machine control through relay output or for SPC AIR SAVING TIMER AND PROXY SENSOR BASE USB DATA SAVE

Send Message

ANOLOG AIR GAUGE UNIT

C JET ANOLOG AIR GAUGE UNIT

7 segment tri colour LED display Air Gauge Can directly connected RS-232 serial port for PC connectivity Accuracy ±1% FSD 0.1μm, 0.5μm, 1μm, Least Count Absolute or comparative measurement Tolerance limit setting 2 LED’s showing status Accept-Reject-Rework Built in air regulator for precise pressure Auto ID – OD recognition Compatible with wide range of Air gauges from leading manufacturers Air saving facility as a standard feature for saving costly air Optional — 50000 readings storage facility LOW MAINTANACE

Send Message

Electronic Air gauge Unit

7.7 Digital Air Gauge System

Applications Standard/Honing Dimension Type Linear Resolution 0.1μm/ 1μm Units mm Measurement Modes Current, Min, Max, TIR, AVG Additional results Max, Min, Ovality, and Taper for respective result can be display in run mode as additional results. Result Formula Editor Result formula can be edited for combinations of Piezo channels and / or other results. Indications Pass, Fail, Warning with facility to select require display reading in require colour according to the tolerance band Grade Max 25 Grades available Other Features Machine Stop Massage and Machine stop signal available for reject job condition Calibration Single/Double Master configurable / Force Mastering after N number of measured jobs / Group Calibration for selected result in one group / Auto Mastering is available. Accept Higher and Lower master on inserting into fixture/plug automatically in calibration process Auto Air Cut-Off Yes (Air will become ON after inserting job in Fixture/Plug) Air Saving facility / When nothing is inserted in Fixture/Plug Air will be OFF Measurement process Auto Cycle (After inserting job in Fixture/Plug it will show related Fixture/Plug result) / Measurement Cycle (Sequential measurement) Online SPC Cp, Cpk,

Send Message

Electronic Air gauge Unit

1.1 HMI DIGITAL AIR GAUGE UNIT

Send Message

ANOLOG AIR GAUGE UNIT

Analog Air Gauge unit

Every gauge carries a calibration certificate giving actual values Module 1A, Module 2A giving the most economical solution to your inspection needs on shop floor High pressure system: high speed of response and self cleaning of gauging area ensures accurate reading of size, taper and ovality at a time Non-contact gauging: long life due to minimal frictional wear Two setting Masters: ensures correct magnification of reading at all times System pressure check gauge: provides a constant check on the system pressure i.e. 3 bars (45 psi) regulated by a high precision regulator built into the unit Minimum line pressure required 4.5 bars (67 psi) Air consumption 46 LPM For diameter 6 mm and above Module-1A air gauge unit is to be used For diameter below 6 mm Module-2A air gauge unit is to be used

Send Message

Electronic Air gauge Unit

4.4 DIGITAL AIR GAUGE UNIT

Features 7 segment tri colour LED display Air Gauge Can directly connected RS-232 serial port for PC connectivity Accuracy ±1% FSD 0.1μm, 0.5μm, 1μm, Least Count Absolute or comparative measurement Tolerance limit setting 2 LED’s showing status Accept-Reject-Rework Built in air regulator for precise pressure Auto ID – OD recognition Compatible with wide range of Air gauges from leading manufacturers Air saving facility as a standard feature for saving costly air Optional — 50000 readings storage facility LOW MAINTANACE

Send Message

Thread Gauges

Thread Plug Gauge

In the case of (screw/bolt) threaded parts, thread plug gauges are used in production shops where the “screws” (externally threaded parts) or the “nuts” (internally threaded parts) are to be quickly checked for inspection and approval. When you consider the metrology (the science of measurement) of threaded parts as a whole, more than a couple of thread gage types are involved; a novice in metrology can become somewhat confused with the terminology of the threaded gages in addition to how they are used. In a threaded part, several features are involved – the thread’s major diameter, minor diameter, pitch diameter, pitch (in case of metric threads) or threads per Inch (TPI in case of Standard American Equivalent (SAE) threads), flank angle, etc. Normally, a GO / NO-GO type of threaded gage will inspect a threaded part based mainly on the pitch diameter. As long as a GO gage is answered (threads properly without being forced) and a NO-GO gauge is not answered, the threaded part is deemed to be accepted and pass inspection. In some specific cases where the thread major diameter (for screws) or minor diameter (for nuts) is critical, separate, plain GO/ NOGO gages (like those used for measuring cylindrical parts) are also used in addition to a threaded gages to determine the acceptance of a threaded part. A thread plug gage is used to check acceptance of a “nut” , (an internally threaded part). For small threaded parts, the gage will be double ended, with one end carrying the GO gage and the other end, the NOGO. For larger parts, the two may be separate pieces. A thread plug gage is designed to check the pitch diameter (to the given pitch / Threads per inch). In order for the part to pass inspection and be accepted, the GO gage should pass through the entire length of the nut, without requiring the use of too much rotational force. The NOGO gage can at the best enter into the nut, checked at both ends, over not more than 2 turns. It should not go beyond this.

Send Message

Electronic Air gauge Unit

1.1 DIGITAL COLUNM GAUGE

1.1 AIR and LVDT PROBE ELECTRONICS COLUMN GAUGE (AIR TRANDUCERS ) / ( AIR PIEZO ) — Single Channel tri color bar graph and Six Digit Display — Inch and metric Ranges — Compatible with Half bridge and full bridge LVDT probe — Absolute / Comparative measurement — Static / Dynamic measurement — Pneumatic converter with 1 input when supplied with this module — Pneumatic converter without ﬂow control valves — RS-232 serial port for PC connectivity — External relay output data saved — Optional — 5000 readings storage facility Range ±0.005 ±0.025 ±0.050 ±0.100 Bar graph L.C. 0.0002 0.0005 0.001 0.002 Six Digit L.C. 0.0002 0.0005 0.001 0.002

Send Message

Air Gauges

Air Ring

Two Jet Air Ring gauge to check outside diameter, taper & ovality Three jet Air Ring gauge for detecting tri-lobed effect for diameter above 4 mm only Can be supplied with tungsten carbide sleeve on request for checking hardened job Can be supplied with multiple jets